Outdoor Faucets
Outdoor faucets are designed to withstand the elements. They can be used in pools, spas, and other outdoor areas that need to be kept watertight. Outdoor faucets are built with a wide variety of materials, including stainless steel and brass. Many have a rubber gasket around the base to help prevent leaks. Outdoor faucets also feature a variety of finishes, including chrome, bronze, brass and copper.
In addition to outdoor faucets, we also carry a variety of accessories like hose bibbs, valves and more. Browse our selection today and take advantage of our low prices!
Outdoor faucets come in a variety of styles, from traditional to modern and everything in between.
The most common types of outdoor faucets include:
Traditional outdoor faucets — These faucets are typically made from copper or iron and are designed to be used when you’re not connected to city water. They can also be used with a hose, but they’re not meant for use with permanent plumbing.
Modern outdoor faucets — These faucets are made from stainless steel or other materials that resist corrosion. Their design is more streamlined than traditional outdoor faucets, and they often have a contemporary look that works well with modern homes.
Related To: Types of Kitchen Faucets | What is a Double Handle Faucet | What is a Widespread Faucet? | What are Bridge Faucets | Types of Sink Shut Off Valves
Specific Outdoor Faucets
1. Spigots
Outdoor faucets come in a variety of styles, materials and prices. The most common types of outdoor faucets are spigots, hose bibs and utility sinks.
Spigots: These are the simplest type of outdoor faucet. They attach directly to the water supply line so you can easily connect a garden hose or fill a bucket. Spigots are usually made of brass or plastic and can be found at any home improvement store or hardware store for less than $20.
Hose bibs: A hose bib is an outdoor spigot that also contains a valve that controls flow so you don’t waste water when not using your hose. Hose bibs are made out of brass or plastic and can be found at most home improvement stores or hardware stores for $10-$20.
Utility sinks: Utility sinks are similar to spigots but larger in size and include a drain hole in the bottom for easy clean up after use. Utility sinks come in different sizes, from small buckets that hold just one gallon all the way up to 55-gallon barrels that can hold hundreds of gallons of water at once! The average cost ranges from $100-$300 depending.
2. Yard Hydrants
Yard hydrants are used in yards and gardens to provide water for irrigation. They are also used in firefighting and for other purposes. These hydrants can be found on your property, in your neighborhood and in public areas. Different types of yard hydrants include:
3. Standard
This is the most common type of yard hydrant that is used by most people. It has an outside spigot that is connected to a water pipe underground. The valve that opens and closes the spigot can either be on the side or top of the unit. Water from this type of hydrant is drawn from underground sources such as wells or lakes.
4. Submersible
This type of yard hydrant has an inside spigot that connects to a water pipe underground, but it is located under the surface level, so it cannot be seen from above ground level. It can draw water from an underground source such as a well or creek bed.
5. Wall Hydrants
Wall hydrants are an important part of the water distribution system for a property. They are used primarily for firefighting purposes, although they can also be used to supply water for use in outdoor fountains or ponds. Wall hydrants are typically located near the property’s driveway or in front of the house.
Wall hydrants can be used to supply water to fire crews during a fire. The fire truck connects to the hydrant using a hose and then pumps out water from the hydrant’s reservoir. This allows firefighters to put out fires more quickly and efficiently than if they had to pump the water themselves.
Wall hydrants can also be used by homeowners who want to install an outdoor fountain or pond on their property. These types of fountains usually come with a pump that draws water from a nearby pool or pond, but sometimes owners will need additional sources of water as well.
An outdoor fountain connected to a wall hydrant is an easy way to provide this extra source of water without having to dig up your lawn or install expensive piping systems.
6. Ball Valve Faucet
The ball valve faucet is a popular style of faucet that has been around for many years. It is made of brass or stainless steel, and it is easy to install. The ball valve faucet also has some unique features that make it a great choice for your home.
First, the ball valve faucet has a single handle control that will allow you to turn the water on and off easily. This means that you don’t have to use two hands in order to get water flowing from your spigot.
Another benefit of the ball valve faucet is that it is easy to clean. You won’t have any trouble getting inside this spigot, as it has a removable head so you can easily wipe out any debris or dirt that may be inside it.
The last benefit of this type of outdoor faucet is its durability and strength. Since these types of spigots are made from strong materials such as brass or stainless steel, they can withstand harsh weather conditions such as rain, snow or wind without breaking down over time.
Outdoor faucets can differ from indoor faucets. There are three main types of outdoor faucets: frost-proof, freeze-proof and weatherproof.
7. Frost Proof Faucets
Frost-proof faucets are designed to withstand freezing temperatures, which makes them ideal for outdoor use in areas where temperatures drop below freezing. Typically, frost-proof faucets are available with a single handle or two handles. The handles on frost-proof faucets may be made of metal or plastic.
8. Freeze Proof Faucets
Freeze-proof faucets are designed to withstand temperatures as low as -20 degrees Fahrenheit (-29 degrees Celsius). They’re often used in regions with milder winters where freezing isn’t an issue or in areas that get regular snowfall. Freeze-proof faucets may have metal or plastic handles and are available with one handle or two handles.
9. Weatherproof Faucets
Weatherproof faucets are designed to withstand all kinds of weather conditions including humidity, sunlight, rain and high winds. Weatherproof is the most popular type of outdoor faucet because it works well in any climate and is durable enough to last years without maintenance.
10. Anti-Siphon Faucets
Anti-siphon faucets are also called “non-siphon” faucets. These types of faucets are designed to prevent the flow of water from siphoning back into the water supply line. These faucets can be used in kitchens and bathrooms where they are most vulnerable to being drained by a siphon action.
The anti-siphon feature is usually activated when the flow of water exceeds a certain amount, usually about 1 gallon per minute. This means that if you have a leaky pipe or your kids are playing with their water toys, then your hot water will not be drained from your tank.
The downside to this kind of faucet is that it can be wasteful at times because it will continue to use hot water even if there is no one using it. It can also waste energy because it does not have an automatic shut off like other types of outdoor faucets do.
11. Faucet Handle Types
There are many different types of faucet handles. Some are basic, while others have special features. Here is a list of the most common types:
Wall Mounted Handles – These handles are mounted directly to the wall and are usually installed under the sink so they can be easily reached by anyone using the sink. They require no plumbing to be installed.
Lever Handles – Lever handles use a long lever attached to a spout that pulls up or down to control water flow. These types of handles are popular in homes because they’re easy to use and look nice, but they can be difficult for older people or people with limited mobility who may need help turning them on or off.
Slide Bar Handles – Slide bar handles have a bar that slides along a track until it reaches its desired position. These types of handles are often used on kitchen sinks because they can be configured in several ways, depending on how much space you have available under your sink and how many cabinets you want to open at once while washing dishes or cleaning up after dinner.
When you are shopping for a faucet, you will likely encounter several types of handles. Here’s a guide to help you choose the right kind for your kitchen or bathroom.
Wheel Handle -The most popular style of faucet handle is the wheel handle. This type of faucet handle has been around for decades, and it is still one of the most popular choices in kitchens and bathrooms today. The reason why this style is so popular is because it’s easy to use and makes it easy to adjust the temperature of your water while you’re in the shower or washing dishes.
There are two main types of wheel handles: flathead and radial. Flathead handles are round with an indentation at the top where they can be easily turned by hand. Radial handles have a hole running through them that allows them to spin freely like a wheel when turned by hand (hence the name).
Tee Handle – The tee handle is the most common type of faucet handle. It has a straight lever with a hole in the center, allowing water to flow through when it’s turned on. The majority of kitchen and bathroom faucets use this type of handle, as do some shower valves.
Tub Spout Handle -This style of handle is used on tub spouts and showerheads. It works much like a tee handle but instead has three prongs that come out from the top of an L-shaped stem. These prongs are what allow you to adjust the temperature and pressure of your water flow by moving them closer together or further apart.
Cartridge Handle – This type of handle is used on most modern bathroom faucets. It uses a cartridge mechanism to control both hot and cold water flow instead of just one or the other like with other styles above. This makes it easier to adjust the temperature without having to worry about getting your fingers wet (or burning them).
What is the Difference Between a Faucet and a Spigot?
The main difference between a faucet and a spigot is that a spigot is the pipe that connects to your water source, while a faucet is the handle on top of it that controls the flow.
A spigot is typically made of metal or plastic, and it can be found on almost any type of plumbing fixture in your home. A faucet is a handle attached to a spigot, which you turn to control the flow of water from the pipe.
Faucets are usually located near sinks or bathtubs, and they can come in many different shapes and styles. Some have one handle that controls both hot and cold water, while others may have separate handles for each side (hot/cold).
You can also find faucets with pull-down sprayer heads built into them instead of traditional handles. These types of faucets are often found in kitchens because they’re easier to clean than traditional designs.
How Do I Identify an Outside Faucet?
Outside, faucets are typically used to fill water tanks and other large containers with water. Filling a large container with water can be a time-consuming task, so an outside faucet is the ideal solution.
Outside, faucets are also known as garden hoses, which further illustrate their purpose of supplying water to plants and other outdoor uses. The majority of outside faucets are designed for use in both cold and warm weather. However, some models may only be appropriate for cold weather climates where freezing temperatures are rare.
Outside, faucets are typically installed on the exterior walls of homes and buildings. However, there are some models that can be installed indoors as well. These indoor faucets usually feature braided hoses that can easily be taken inside when not needed for outdoor work or play.
Outside, faucets come in many different styles and colors, including solid colors such as black or white, along with vibrant colors like red or blue, depending on your preference.
How Do I Identify My Outdoor Faucet Brand?
If you need to replace your outdoor faucet, it’s important to identify the brand name. This can help you find the correct replacement part for your outdoor faucet.
- Step 1 – Look at the base of your outdoor faucet. You may see a label that says “Rainbird,” “Valve,” or something similar.
- Step 2 – Look at the handle of your outdoor faucet. You may see a brand name on it, such as “T&S” or “Delta.”
- Step 3 – Look at the spout of your outdoor faucet. You may see a brand name on it, such as “T&S” or “American Standard.”
How Do I Find the Valve Stem on My Faucet?
The valve stem is the part of your faucet that you turn to control water flow. It’s usually located on the handle, in the center of the faucet.
You can find it by looking for a small hole or slot on the side of your faucet handle. The valve stem should stick out from this hole when you turn on your water.
If there’s no slot or hole visible in your faucet handle, look for a screw-on cap over the valve stem. Remove this cap and twist off the stem to reveal its inner workings. In many cases, you’ll see a rubber washer around this stem; if not, look inside for other parts that help regulate water flow.
When you need to repair your sink or tub faucet, finding its valve stem can be as simple as twisting off a cover or unscrewing a screw. Once you find it, unscrewing or pulling off this piece will expose the valve and allow you to fix any problems with ease!
