🔥 Would you like to save this?
We'll email this post to you, so you can come back to it later!
The brief was to create a warm, comfortable home with modern touches. Although the house was in reasonable condition, the joinery and fittings throughout the house were dated, had been well used and looked tired. Many of the period features had been stripped out and those that remained had not been maximised. The house lacked character and personality although it benefited from “good bones”, nicely proportioned rooms, a delightful garden and a handsome exterior.
In order to come up with the very specific design ideas, we create most designs with the assistance of state-of-the-art AI interior design software. Also, assume links that take you off the site are affiliate links such as links to Amazon. this means we may earn a commission if you buy something.
LLI Design felt that more could be made of the period features, enhancing some and reinstating others to bring out more of the Victorian feel of the property as well as adding more contemporary elements to the scheme.
Layout
The house comprised of c. 2500 sq ft/230 sqm spread out over 3 floors including a cellar and a lovely rear garden.
The ground floor comprised of a generous hall leading to 2 connecting reception rooms and at the end of the hall an extended kitchen. There was a small WC and stairs down to the cellar. It was decided to leave the cellar as it was and use it for additional storage. The first floor is divided into 2 bedroom suites. The Primary Suite; comprising of a good size principle bedroom with steps down to an ensuite and off the primary bedroom, a small dressing room.
A Nursery Suite was created at the front of the house comprising of a sizeable bedroom and an ensuite bathroom.
On the half-landing up to the second floor was a children’s bedroom and on the top floor a family bathroom, guest bedroom and a generous study room.
Ground Floor—Entrance Hallway
Although the entrance hallway was a good size, it lacked character. To address this the stained glass in the fan-light window above the front door and side window was reinstated, in a bespoke design, bringing light, colour and texture into the hallway.
The original tiled floor had long been removed so a period style crisp black and white tile with a border pattern was specified. This immediately visually increased the size and lightness of the hall area.
Considering the overall size of the house almost no provision had been given to coat storage. So as not to compromise the size of the hall a small amount of space was nibbled out of the generous dining room adjacent to the hall in order to create a cloaks cupboard. This created a small return in the dining room; so that this wasn’t visually intrusive in the dining room the coving, skirting and dado detail wrapped seamlessly around the new return. The new return had the added advantage of creating an alcove for a sideboard, thus making the whole alteration seem natural.
Nigel Tyas were commissioned to produce a dramatic copper and glass pendant light in the stairwell that hung from the top floor ceiling down to the ground floor, giving a visual connection and really creating a wow factor.
Ground Floor—Living & Dining Room
In the living and dining rooms new light greyed oak parquet floors and traditional white marble fireplaces were specified.
Bespoke pale grey lacquer joinery was designed and installed either side of the fireplaces in both rooms, incorporating plenty of storage, with asymmetrical shelving which was lit with individual accent in joinery spotlights. At the side of one of the fireplaces a black steel log store was incorporated.
Both the dining and living rooms had the original ornate plaster ceilings. However they had been painted white throughout and were visually lost. This feature was brought back by painting the plaster relief in close, but contrasting, tones of grey to emphasis the detail.
Ground Floor—Kitchen
The kitchen extension, although a good size, was rather dark, with a wall of folding sliding doors on one side at the back overlooking the garden. The architectural style was traditional and in keeping with the architecture of the house.
The rear extension was enhanced by adopting a contemporary aesthetic, installing folding sliding doors in dark grey aluminium on 2 sides, which allowed in copious amounts of light and gave a real sense of connection with the garden.
The existing kitchen was completely redesigned to suit the family. Creating a bespoke joinery kitchen in lacquer with walnut drawers and interiors. The styling was contemporary classic in soft colours with plenty of storage, including a generous larder and breakfast cupboard to house a kettle and toaster as well as a small wine fridge. Thus eliminating all clutter with everything being behind doors when not required. A Boston sink was specified along with a composite worktop and colour was added to the backsplash with ceramic deep blue tiles.
Bespoke metal brackets were designed to suspend 3 glass pendant lights over the island below the glass skylight.
Photo credit / Styling: Rick Mccullagh / LLI Design
Designed by: LLI Design
Related: Crown Heights Brownstone | Charming Hoboken Townhouse | Radiant Townhouse Design | Full-Floor Sunny Townhome
🔥 Would you like to save this?
We'll email this post to you, so you can come back to it later!
Technical Info
First Floor—Primary Suite—Dressing Room
The dressing room was redesigned with bespoke oak full height joinery units to make the most of the space.
First Floor—Primary Suite—Primary Bedroom
The existing alcoves either side of the bed where stripped back and reinstated with lacquer interiors and a shadow gap detail around. Delicate downlights in the shelves added interest to the room. An accent ceiling light was added for dramatic effect.
First Floor—Primary Suite—Primary Ensuite
The primary ensuite, which overlooked the garden, was redesigned and fitted with a large double wall hung vanity unit, with elegant composite basins on a thick natural stone shelf with a lacquer vanity unit underneath, wall mounted taps and double mirrors above. A sculptural composite freestanding bath sits near the window. A large matt tile was specified for the floor, steps and wall, with a contrast ceramic polished narrow rectangular tile for the shower enclosure. Dramatic lighting under the vanity unit and in the shower alcove added to the sense of well-being.
First Floor—Nursery Suite (Bedroom 2)
The Nursery suite was redesigned,with playful illustrated “cloud” Roman blinds and a colourful “watercolour dot” wallpaper. The ensuite bathroom was redesigned featuring a wall hung vanity unit with deck mounted basin and a bath with a shower over.
Second Floor—Bedroom 3
Bedroom 3, on the half-landing, was designed as a fun playful child’s bedroom featuring a playful illustrated fox Roman blind.
Lighting Design
To enhance the interiors a new lighting scheme was designed and specified including new fittings and garden lighting which added to the feeling of the garden and terrace being an additional “Outdoor room”. An intelligent Rako lighting system was installed in order to create moods, ambience and timed events internally and externally, controlled from wall mounted keypads and also by iPads/iPhones.
As with the majority of LLI Design’s projects, the construction, joinery, home automation and landscaping were carried out by the teams from LLI Design’s vertically integrated sister companies —Pegasus Property & Pegasus Automation.
Press Distribution: v2com
About Pegasus Property
Pegasus Property are a high-end construction, development and bespoke joinery company specialising in prime residential projects. Pegasus Property are LLI Design’s sister company and share ownership, management, offices & technical staff with LLI Design.
Pegasus Property’s unique vertical integration with LLI Design, together with their dedicated team of skilled craftsmen, site management, trusted specialist subcontractors & associate consultants, allows them to deliver seamlessly designed and executed projects with a single point of contact for their clients.
About Pegasus Automation
Pegasus Automation design, install, configure and maintain a wide range of home automation systems for private clients and developers. Pegasus Automation are the home automation and custom installation division of Pegasus Property—A bespoke construction company based in Highgate, North London. Working alongside Pegasus Property & LLI Design their unique vertical integration allows them to deliver seamless installations with a single point of contact for their client.
Related: Award-Winning Townhouse | Southwood London Townhouse | Moyle Drive Duplex
🔥 Would you like to save this?
We'll email this post to you, so you can come back to it later!
