Skip to Content

Why are drywall knives curved?

Applying a compound on drywall looks easy. However, there are things you need to consider to make the job done correctly. This article discusses what you need to know before buying a drywall knife.

A person applying a compound using putty knife.

Before you buy a drywall knife, it’s important to know about the different types and what they’re used for. There are curved knives, straight knives, and taping knives. Each one is used for different purposes. For example, a curved knife is good for cutting in and around corners, while a straight knife is better for making long cuts.

What is a Drywall Knife?

A drywall knife is a tool that is used to cut and score drywall. It consists of a blade that is sharpened on both sides and a handle. The blade is usually made of stainless steel or carbon steel.

Why Do You Need a Specific Knife for Drywall?

Drywall is a material that is very soft and easy to cut. However, it is also very fragile and can be easily damaged. A drywall knife has a sharp blade that is designed to cut through drywall without damaging it.

Types of Drywall Knives

When it comes to choosing the right type of drywall knife, it’s important to know about the different types and what they’re used for. Each one is used for different purposes.

There are three main types of drywall knives: curved, straight, and taping.

Curved Drywall Knives

A person cutting a drywall using a cutter.

Curved knives have a blade that curves inward at the tip. This design allows them to make tight cuts in corners and around other obstacles. They are also known as utility knives or putty knives.

Straight Drywall Knives

Straight knives have a blade that is straight from end to end. This design makes them better for making long, straight cuts. They are also known as scoring knives or joint knives.

Taping Drywall Knives

A person apply putty using a long putty knife.

Taping knives are the most versatile type of drywall knife. They can be used for both taping and finishing drywall joints. They come in a variety of sizes, so you can choose one that’s comfortable for you to use.

Why is it important to choose the right knife for your job?

How to Choose a Drywall Knife

Drywall knife a saw and a cutter.

It’s important to choose the right kind of knife for your job because each one is designed for a specific purpose. If you use the wrong type of knife, you may not be able to do your job properly, or you could damage the drywall.

If you’re planning on doing a lot of drywall work, it’s worth investing in a good-quality knife. But if you’re only going to be using it occasionally, a less expensive knife will suffice.

When choosing a drywall knife, it’s important to consider the type of cuts you’ll be making. If you’ll be doing a lot of cutting in corners, a curved knife is a good option. If you’ll be making long, straight cuts, a straight knife is the better choice. And if you’ll be doing both, a taping knife is the most versatile option.

It’s also crucial to consider the size of the knife. Taping knives come in a variety of sizes, so you can choose one that’s comfortable for you to use. If you have large hands, you may want to choose a larger size. And if you have small hands, a smaller size may be more comfortable.

Finally, consider the blade material. Carbon steel blades are very sharp and durable, but they can rust if they’re not properly cared for. Stainless steel blades are also sharp and durable, but they’re less likely to rust.

Tips for Using a Drywall Knife

When using a drywall knife, always be sure to wear gloves and safety glasses. And make sure the blade is sharpened before each use. A dull blade can cause the drywall mud to bunch up and become difficult to spread evenly.

There are a few things you can do to avoid damaging the drywall:

  • Score the drywall before cutting to avoid damaging it.
  • Use a sawing motion when making long cuts.
  • Remove the drywall piece by gently pushing it away from the wall.
  • If the drywall is too thick to be cut with a knife, use a saw to make the cut.

How to Sharpen Your Drywall Knife

A person trying to apply putty on a wall.

If your drywall knife is getting dull, you can sharpen it using a sharpening stone or a file. First, find a flat surface. Then, wet the stone with water and then rub the blade back and forth on the stone. Be sure to hold the blade at a 20-degree angle and stroke it along the stone in one direction only. Repeat until the blade is sharp again.

You can also use a honing rod to keep the blade sharp.

To avoid damaging the blade, only sharpen it when it’s absolutely necessary. And be sure to follow the manufacturer’s instructions carefully.

How frequently should I sharpen my drywall knife?

When Should I Replace My Drywall Knife?

You should replace your drywall knife when the blade becomes damaged or excessively dull. You should also replace it if it’s not comfortable to use anymore. Signs it’s time to replace your knife include:

The blade is bent or chipped.

The blade is too dull to use.

The handle is loose or broken.

You should also regularly inspect your drywall knife for damage and wear. And be sure to clean it after each use to prevent the build-up of drywall dust.

How to Clean Your Drywall Knife

A person holding a rusty drywall knife.

It’s important to keep your drywall knife clean to avoid damaging the drywall. After each use, wipe the blade with a clean cloth. If the blade is very dirty, you can wash it with soap and water.

Be sure to dry the blade before placing it into storage. When storing your knife, be sure to keep the blade covered in a safe place where it won’t be damaged. This will protect the blade and keep it from getting dull.


A person with protective helmet applying compound.

When you’re working with drywall, it’s important to have the right tools for the job. A good-quality drywall knife is a must-have for anyone who wants to do a professional job. To recap, here are some things to keep in mind when choosing a drywall knife:

– The type of job you’re doing: If you’re cutting corners, you’ll need a curved knife. If you’re making long, straight cuts, you’ll need a straight knife.

– The size of the blade: Choose a blade that is comfortable for you to use. The blade should be long enough to make the cuts you need but not so long that it’s difficult to control.

– The size of the handle: The handle should be comfortable for you to grip and easy to control.

– The material: The blade should be made of stainless steel or carbon steel for durability.

With these tips in mind, you’ll be able to choose the right drywall knife for your needs and use it safely and effectively.

Have any additional tips or tricks? Leave a comment below!